Model: Mel-8704-R
3 in 1 Instrument (EMF - Temperature - Light)
The
Mel Meter Model 8704R is an Intelligent microprocessor based instrument
specifically designed for Paranormal Investigators & Enthusiasts.
Several Important features have been incorporated into this durable,
precision hand held instrument. All of them accessible with the meter
being held in on hand.
Measures EMF & Temperature "Cold Spots" Simultaneously
That's
right...the Mel Meter is the only Instrument that can do this. During
their Investigations, an Investigator will often encounter an EMF
change which is usually followed by a significant Temperature drop.
Now, imagine being able to validate both changes simultaneously, and be
able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ELF Down to 30Hz!
It
has been the generally accepted theory that spirits do emit an
extremely low frequency (ELF) EM field, which commonly registers
between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz
would be considered part of the ELF range. The Mel-8704 was designed to
address this ELF range, and is actually 20Hz lower than a KII's 50Hz
bandwidth.
Custom Red "Night View" Display
The
Red Backlight display is ir compatible for night vision and measures a
full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on
the same screen. Both measurements can be read from several feet away.
The display can be turned On or OFF manually for display viewing in dark areas.
EMF "Burst Mode"
This
feature allocates 100% of the micro-processors scan speed to monitor
dynamic EMF changes. The display can update so quickly that your eyes
will barley be able to keep up with it. If something is on the move,
this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Mel-Cal
The
Mel Meter is the only Intelligent EMF / Temperature device that uses a
proprietary "Smart Calibration" function that allows the user to
Calibrate the instrument in the field. Should the unlikely event ever
occur, and the unit performs out of Spec. All you need to do is contact
us and give us your serial number ID. We will provide you with a
special code sequence to get your unit working in "Like New" condition
again...it's that simple!