| This genuine K-II can
Measure the EMF (Electro-magnetic Field) radiation strength of
electrical devices in your home, workplace or school, outdoor power
lines, underground lines and even when you travel and shop for
appliances. Simply Push "ON" and push "OFF" to control the unit. The
unit stays on until you push again. Couldnt be easier.
Since EMF's are nearly
everywhere it may be impossible to totally avoid them. The SAFE RANGE
EMF METER from K-II can help you measure these potentially harmful
fields and determine the safe range to help reduce exposure. It also
helps you determine which appliances produce high level emissions.
Five bright colored LEDs
will illuminate to indicate the strength of the field. Very easy to see
in low light conditions. Response is instantaneous. No bouncing needle
or fluctuating number digits. These features make the K-II very popular
for paranormal research and ghost hunting as well. Also known as the
Safe Range Meter. Made in USA. Uses one 9V battery (included). Single
Axis.
- Exclusive Push "ON", Push "OFF" switch
- Easy to read 5-Segment LED Display
- Covers the ELF range & VLF range (50 to 20,000Hz)
- Uses one 9V battery (included)
- Single Axis
- Accuracy of 5% at 50-60Hz
- Instantaneous Response To EMF Fluctuations and spikes
Rugged, Compact, & Lightweight EMF Meter
Couldn't be easier to use,
just turn it on and get accurate reliable readings. Perfect for
situations needing high resolution measurements of AC magnetic fields
without spending a lot of money. Large LCD display reads 0.1 -199.9 mG
over the ELF range of 30 - 400 Hz. Calibrated to within 4% 3 digits
at 50/60 Hz. This single axis meter samples every 0.4 seconds when
flipped on with slide switch. Requires one 9V battery. One year limited
warrantee.
Like all single axis
meters, this meter must be rotated during use to find the proper
orienrtation to the magnetic field being measured to get proper
readings.
Mel Meter 8704 is Designed Exclusively For Paranormal Investigators
ELF Range down to 30Hz ! This is 20Hz lower than the KII
Night Vision Safe, High Intensity Red LED ProNavigator or White/Blue
easily Illuminates the floor in front of you
and objects within a 30' Range.
Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously!
Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight
Lasts 3 Hours!
EMF "Burst" Mode Feature for Tracking Dynamic EMF movement
Measurement Ranges: 20, 200, 2000 uTesla
200, 2000, 20,000 mGauss
Super Bright Custom "Night view" Display with On/Off Button
Fast Response Thermocouple Temperature Sensor
Record Feature Captures Min & Max Values |
